Greetings All, I have inherited a stand alone system at a state park originally installed by Currin Corporation out of Michigan (I think that he did work in a number of state parks in the region). Good install, but the custom designed 72 volt controller (a Canadian company that slips my mind at the moment) crapped out. I replaced it with a 72 volt midnite controller and all is well except... The original system used a dc relay to disconnect the 72 volt dc submersible well pump. I kept the relay in the circuit controlled by the midnite aux port. Since I was unable to read any programming from the old controller, I am not sure where to set the cut-in and cut-out voltages for the pump relay. Battery bank: 12 Deka MK 8G27 (72 volts, 176 ah) Pump current: unknown at the moment
Anyone? Thanks, Kris
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/[email protected]/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
