P.S. The Radian is set to phase shift, and it reliably shuts off micro
inverters at set point voltages. The issues occur at lower battery
voltage, below the set points for the phase shift.
---

On 2020-08-25 11:20, [email protected] wrote:

The inverter is set to ON not to SEARCH. If the Enphase circuit is switched off, the pulsing stops immediately. This system has both AC and DC coupling.
In another location, with a Sunny Boy AC coupled with a pair of stacked VFX3524 
 inverters, there is some pulsing in low light conditions. The Radian and 
Enphase combo is much more noticeable.

---

On 2020-08-25 10:42, Jerry Shafer wrote: Wrenches I would think that in time there might be damage. Check to make sure the inverter is not on search but I stead "ON", next if you turn off the enphase the the outback perform normally. Check the inverter frequency to see your frequency is shifting have one that has both AC & DC Coupling and no issues.
On Tue, Aug 25, 2020, 6:37 AM <[email protected]> wrote: 
Hello Wrenches,

An AC coupled arrangement, with an 8 kW Radian and 8 Enphase microinverters, pulses lighting at low levels of array illumination. This is generally not too much of a problem.

Under certain levels of solar isolation, the pulsing becomes extreme and causes the motors in the refrigerator and air-conditioner to pulse, sometimes causing very audible vibrations.

Will this harm the appliances? Is there anything that can be done to moderate or stop the pulsing?

Thank you,

Drake
Athens Electric LLC

--
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm [1]

Check out or update participant bios:
www.members.re-wrenches.org [2]

_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm [1]

Check out or update participant bios:
www.members.re-wrenches.org [2]

_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm [1]

Check out or update participant bios:
www.members.re-wrenches.org [2]



Links:
------
[1] http://www.re-wrenches.org/etiquette.htm
[2] http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to