Go look at grudfus SQFlex they can go pv direct or AC in Jerry On Tue, Sep 22, 2020, 12:10 PM frenergy <[email protected]> wrote:
> Wrenchers, > > We're upgrading an off-grid water system. Dynamic head > while pumping at 20 GPM is 150 ft from water level to wellhead and then > its 85 ft vertical to storage tank so 235 ft total head to open > discharge. We would like to get most of that 20 GPM, we need to know if > there is personal experience with starting a 1.5 or 2 HP, 240 vac, 2 > wire submersible pump against that kind of head with an Outback Flex > Power2 (2 X VFXR3648A-01 inverters). > > The FP2 will also be powering standard off-grid loads. > There is plenty of battery behind the inverters. If a soft-start > solution is required, some specifics would be great. Grundfos doesn't > seem to have an option for these requirements, solar-direct is not an > option at this location. > > Thanks, > > Bill > > Feather River Solar Electric > Bill Battagin, Owner > 4291 Nelson St. > Taylorsville, CA 95983 > 530.284.7849 > CA Lic 874049 > www.frenergy.net > > > -- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
