Mac,

As a ham radio operator, renewable energy installer and off-grid system owner I can say that your customer is going to experience RFI with most any inverter.
If you or he have no luck finding that ideal inverter I suggest investigating the RFI mitigation resources found at Palomar Engineering.

Here's a link to the solar portion of their website:
https://palomar-engineers.com/rfi-kits/solar-system-rfi

I get no RFI from my older Outback VFX 3524 but then again, my rig is about 50 feet away from my inverter.

Roy Butler
Four Winds Renewable Energy, LLC
8902 Route 46, Arkport, NY 14807
607-324-9747  www.four-winds-energy.com


Although no trees were killed in the sending of this message, 
a large number of electrons were terribly inconvenienced.

                
On 10/2/2020 11:35 AM, Mac Lewis wrote:
Hi Wrenches,

I have a HAM radio enthusiast that needs to replace their off-grid inverter.  He would like the inverter that puts off the least interference.  I don't know a whole lot about evaluating an inverter for this, but I am reaching out for recommendations.  Needing ~8kVa at 48V.

Thanks!



--



Mac Lewis

"Yo solo sé que no sé nada." -Sócrates


_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org


_______________________________________________
List sponsored by Redwood Alliance

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to