hey all, anyone have any good recommendations on clamp meters rated up to or over 1500Vdc? I had my eye on the Hioki unit but their fine print says you can only go over 1000V if the circuit is isolated from the grid and isolated from ground. Isolated from grid means I can't take operating voltage readings under load (at least not with a transformerless inverter) and isolated from ground means I can't use it with a larger transformer-based inverter. anyone found a better unit out there without the fine print?
thanks! evan
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
