That does not sound best to me. I get the point but there are much better ways. Not good for you to be close around a bank in EQ. If you are checking water level every month the level should not be really low. You do this in case you miss a cell a month back! You should be counting as the water goes in to see if you have put about the same amount in. I have never noticed any advantage to mixing the cells after watering. They will get mixed the next day. If this concerned you, you could run a 30 minute absorb after watering.
I like to EQ before watering so my customer does not over fill and start the corrosion process. Just open all of the cells and look before they EQ. I also like to mark 2 of the lower SG cells and 2 of the good ones. This makes it easier for my clients to check the bank. Once every summer or 2 they need to look at all of the cells. Summer is best because it is the time when you can do long corrective EQ's if you find trouble. Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ e-mail [email protected] text 209 813 0060 On Tue, 9 Feb 2021 05:36:39 -0800, Mark Frye <[email protected]> wrote: > My Rolls manual says: > > "It is recommended to water the battery cells half way through the > equalization. This is to > assure the water is completely mixed into the electrolyte." > > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
