If the terminal blocks have #s then he would use block #7 and use the com. & NO contacts. 3 terminals; com, NO & NC > On Apr 14, 2021, at 7:23 AM, Steve Romo <[email protected]> > wrote: > > Hello Wrenches, > I have a customer with a very old (1995) Xantrex SW4024. He is trying to > connect the two wire start to his generator. This unit has two sets of > terminal blocks instead of the relay spade connectors I'm used to. Does > anyone know or have an old manual that shows which ones to use? I know if I > was on site I could just use my meter and figure it out, but it's a 3 hour > drive. > > Thanks in advance for your help > > -- > Steve Romo > Mountain Power Solutions LLC > NABCEP certified PV Installer #110112-124 > Kohler Certified Generator Technician > Generac Certified Generator Technician > > 970-433-6316 <tel:970-433-6316> > _______________________________________________ > List sponsored by Redwood Alliance > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org >
> [email protected] > <blocked::mailto:[email protected]%22%20%5Co%20%22blocked::mailto:[email protected]> > www.SWNL.net > <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/> > Solarwinds Northernlights > Serving Mid Coast Maine & Northern California > 207-832-7574 Cl. 610-517-8401 > > Blair "TUMP" May > ******** MAINE'S CHARTER ******** > NABCEP "Certified PV Installer" > > ******** MAINE'S CHARTER ******** > Trace Xantrex "Certified" Dealer / Installer" >
_______________________________________________ List sponsored by Redwood Alliance List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
