For this to happen, XW should be logging warnings or faults. Have you checked? This problem is probably related to the master / slave config. If this is XW+, there was firmware for that back in the day for fault 55 an EPROM failure that messed up timing. It was very repeatable at a certain time of day. If this is XW Pro disregard. You really need to differentiate the two different models as they are quite different in some regards. Good Luck!
Dave Angelini Offgrid Solar "we go where powerlines don't" http://members.sti.net/offgridsolar/ [1] e-mail [email protected] [2] text 209 813 0060 On Tue, 27 Apr 2021 20:43:19 -0600, Laura Conchelos wrote: I have two Schneider XW 6848s in an off-grid system. I've had some issues I think we've gotten figured out in relation to the configuration of the inverters as master/slave. Now it seems the inverters shut down for ten seconds or so in the evening at 7:59. It doesn't seem to have done it last night. Though every other night since I reconfigured them it's done this. The reconfiguring might be a red herring, who knows. Anyone else run into something like this? Laura Links: ------ [1] http://members.sti.net/offgridsolar/ [2] mailto:[email protected]
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
