Honestly we see pretty steady failures of the old VFX series too. 5 to
10 years, then rebuilds. The rebuild boards do not seem to be as robust
either, we just had one fail after a little over a year. The failure
rate definitely seems to correspond to grid tie systems with either
large arrays or large loads in the backup.
Ray Walters
Remote Solar
303 505-8760
On 5/20/21 12:26 PM, [email protected] wrote:
I’m going to be upgrading on old dual inverter OutBack FX 2524 system
to dual VFX3524 inverters and would prefer to not use the new R series
as I have heard about problems with them.
I have located only one reconditioned VFX3524 so far but I see that
there are VFX3524M Marine version’s available. I have no experience
with the Marine version. Can the Marine model work in an off grid home?
I see in the spec sheet that the VFX3524M has a listed AC Input
Current Max of 30A while the regular VFX3524 is listed at 60A.
Dave Palumbo
Hyde Park, VT
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
