Yeah, I know it's service rated here, but I wanted to make sure it would work functionally. I guess it's no different than a service rated generator ATS in that you can install the ATS without the generator and just have it there for future use.
Thanks all for the feedback. Jason Szumlanski On Fri, Sep 10, 2021, 2:01 PM Eric Smiley <[email protected]> wrote: > The spec sheet indicates it is rated as Service Equipment in the US but > not in Canada. :-( > > > *Eric Smiley,* Project Manager > [email protected] > T: 250.703.6004 <+12507036004> > T: 888.386.0116 <+18883860116> > *VIRIDIANENERGY.CA <https://viridianenergy.ca/>* > > * <https://viridianenergy.ca/>* > > > On Fri, 10 Sept 2021 at 10:51, Jason Szumlanski < > [email protected]> wrote: > >> Yes, I plan to install both a main breaker and a load breaker because >> both will be necessary in my ultimate design. I don't plan on installing an >> Envoy at this time. So I can't do any of the commissioning tasks. >> >> I will let you know how it goes. >> >> On Fri, Sep 10, 2021, 12:50 PM Rebekah Hren <[email protected]> >> wrote: >> >>> I don't see why not, I have one I'm experimenting with in my garage now >>> and it passes power through the bus prior to commissioning. I would make >>> sure to add the Eaton BR main breaker in the Enpower at whatever amperage >>> required for a more trustworthy discontent than the relay manual switch. It >>> doesn't come with any breakers. >>> >>> You could also commission it as a single device, perhaps? The app lets >>> you add devices later. >>> Let us know if you try it! >>> Rebekah >>> >>> On Fri, Sep 10, 2021, 7:57 AM Jason Szumlanski < >>> [email protected]> wrote: >>> >>>> Does anyone know if you can use the Smart Switch as a simple service >>>> disconnect if not installing solar and batteries now and have it work out >>>> of the box without any commissioning? >>>> >>>> I have a client building a new house and they are going to add solar >>>> and batteries after the certificate of occupancy is issued. I want to get >>>> the Smart switch installed as a service disconnect so I don't have to pull >>>> the meter later. I assume I can trust use the load side lugs to feed the >>>> main distribution panel in the home. >>>> >>>> Jason Szumlanski >>>> Florida Solar Design Group >>>> _______________________________________________ >>>> List sponsored by Redwood Alliance >>>> >>>> Pay optional member dues here: http://re-wrenches.org >>>> >>>> List Address: [email protected] >>>> >>>> Change listserver email address & settings: >>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>>> >>>> There are two list archives for searching. When one doesn't work, try >>>> the other: >>>> https://www.mail-archive.com/[email protected]/ >>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>>> >>>> List rules & etiquette: >>>> http://www.re-wrenches.org/etiquette.htm >>>> >>>> Check out or update participant bios: >>>> http://www.members.re-wrenches.org >>>> >>>> _______________________________________________ >>> List sponsored by Redwood Alliance >>> >>> Pay optional member dues here: http://re-wrenches.org >>> >>> List Address: [email protected] >>> >>> Change listserver email address & settings: >>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >>> >>> There are two list archives for searching. When one doesn't work, try >>> the other: >>> https://www.mail-archive.com/[email protected]/ >>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >>> >>> List rules & etiquette: >>> http://www.re-wrenches.org/etiquette.htm >>> >>> Check out or update participant bios: >>> http://www.members.re-wrenches.org >>> >>> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
