This lacks the protections you would find in a traditional battery
charger, but can work.
2.5 volt 60-amp power supply like the Meanwell RSP-320-2.5
https://www.meanwellusa.com/upload/pdf/RSP-320/RSP-320-spec.pdf
These are available at Digikey.
Kent Osterberg
Blue Mountain Solar
On 1/20/2022 4:35 PM, Jay wrote:
Hi all
What recommendations do folks have for a 2v battery charger.
It’s for 2v lead acid cells, preferably looking for something that’s adjustable
to the specific battery chemistry.
Higher amps also preferred as the 2v cells are usually pretty large. 10 amps
would work but higher probably better
I’ve looked around but haven’t found anything.
Thanks
Jay
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
