I think if the MATE3S is left in the settings screen, OpticsRE can’t edit remotely. Exit the Settings section on the MATE3 (entered with the LOCK button) and you should be able to use OpticsRE to make changes.
Since you might be rolling a truck, bring the latest MATE3S firmware with you, especially the newer AC coupling shift software. The get above 90%, you can force Bulk charge via the inverter charger and that will charge to the Bulk voltage helping the batteries get a to 90%. But, the next day, the inverter will just be idle unless ReBulk is triggered. The inverter will be in passthru and SunnyBoy does the selling. I added AC relays between the SunnyBoy and their breaker just in case the battery voltage got too high during off grid periods and other Radian charger events. Good luck and have fun! Maverick Brown Off-Grid Solar Commander since 2006 Maverick Solar Enterprises, Inc. • Solar Commander Remote Power • SunFlow Systems Cathodic Protection [email protected] 512-460-9825 > On Apr 22, 2022, at 3:13 PM, William Miller via RE-wrenches > <[email protected]> wrote: > > Friends: > > I installed a Radian AC coupled system a few months ago. We are trying to > dial it in to work with a Blue Planet battery system. > > I cannot make any adjustments remotely through Optics. Once in a while if I > reset the gateway I can change one setting, but rarely does it succeed. The > little wheel turns for a couple of minutes and then I get a failure dialog > box. > > I was told to power cycle the Mate. This did not solve the problem. > > Has anyone else experienced this? > > Thanks for any input. > > William > > Miller Solar > 17395 Oak Road, Atascadero, CA 93422 > 805-438-5600 > www.millersolar.com <http://www.millersolar.com/> > CA Lic. 773985 > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > <http://re-wrenches.org/> > > List Address: [email protected] > <mailto:[email protected]> > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > <https://www.mail-archive.com/[email protected]/> > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org> > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > <http://www.re-wrenches.org/etiquette.htm> > > Check out or update participant bios: > http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
