I have one, Jeremy. The exact item - Heinemann GJ250 in good condition.
You can have the Trace (pre-Xantrex) DC250 standoff bracket too if you
want it. I see that it's missing both allen set screws for the 4/0
terminals. You'll have those, right? If not I can include a pair off of
one of the two GJ175s that I found in the same box.
What's a fair price to both of us for this bit of unobtainium? A new
Midnite MNEDC250 is $142 from Backwoods, dealer price $97.76. I think
that $100 plus shipping would be the most I'd ask for it, and I'm
willing to consider a good argument that it's worth less. When it was
new it was $195 from Trace Engineering, as I recall, and those were real
dollars. Funny how far it's dropped over the decades.
Let me know, mi amigo,
Allan
On 5/31/2022 10:15 PM, Jeremy Rodriguez via RE-wrenches wrote:
Hello
Does anyone have a good used 250A CB for the old DC250 by Xantrex? I
believe they are a GJ250?
Or does any of the new equipment work. Kind of looks like the Magnum
Energy breakers in a MMP.
Contact me off list If necessary.
Regards,
Jeremy Rodriguez
Solar Installation / Design Expert
All Solar, Inc.
1453 M St
Penrose Colorado 81240
--
*Allan Sindelar*
[email protected] <mailto:[email protected]>
New Mexico EE98J Journeyman Electrician
Founder (Retired), Positive Energy, Inc.
*505 780-2738 cell*
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
