Hi Kirk

You didn’t give a lot of info but I don’t think there is a product that meets 
your requirements. 

I’m guessing its either 24v or 48v system with with a  C40 controller. 

Personally I’d leave the old system as 20 year old modules are not cost 
effectively worth messing with. 
And if you did, you’d get what a couple hundred watts more at max maybe?

And then use the CC that best fits your system for the 5kw new. 100 amp, 
midnite or OB or Schneider 

My 2 cents 
Jay

> On Jun 1, 2022, at 3:31 PM, Kirk Herander via RE-wrenches 
> <[email protected]> wrote:
> 
> 
> All,
> I have an off-grid customer adding more PV to their 20 yr old array. It would 
> be soooo convenient to find a dual channel controller to keep each array 
> separate, instead of sourcing separate new controllers for each array. . The 
> original controller is not mppt. Arrays are 2kw(old Astropowers on roof) and 
> 5kw( bifacials on ground), respectively. Mixing and matching old and new will 
> not work and is bad practice anyway. Thanks.
> -- 
> Kirk Herander / [email protected]
> Owner|Principal, VT Solar, LLC
> Celebrating our 31st Anniversary 1991-2022!!
> www.vermont.solar
> dba Vermont Solar Engineering
> 802.863.1202
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: [email protected]
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the 
> other:
> https://www.mail-archive.com/[email protected]/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
_______________________________________________
List sponsored by Redwood Alliance

Pay optional member dues here: http://re-wrenches.org

List Address: [email protected]

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
http://www.members.re-wrenches.org

Reply via email to