We have been using VHB zip tie bases for at least 10 years. They are marginally better than the foam zip tie bases. Some material they fall right off of and some material they do quite well on. In all cases they do better than the foam tape bases. But that may not be good enough. We consider adhesive zip tie bases a temporary fastening.
-James Jefferson Jarvis APRS World, LLC +1-507-454-2727 http://www.aprsworld.com/ On Wed, Jun 8, 2022 at 4:07 PM Jay via RE-wrenches < [email protected]> wrote: > I’m wondering if anyone has ever used a high quality VHB zip tie > attachment base on the center “ junction” box of a mid junction box panel. > > I’m just looking for options to anchor the wire on that perfect location, > which has no attachment. > > And if you have what are the best parts to get. > > Wiring for MLPE on Unirac RM10 > > Thx > > Jay > > > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
