Hi Scott, I asked Sol-Ark about this a while ago. The Sol-Ark cannot handle the increase in current on the pins of the CT input (even though it's quite small). However, my info could be out-dated.
Maybe you could source a CT with 1/2 the output ratio and make it work? Let us know if you find a good solution. Thanks On Thu, Aug 11, 2022, 1:10 PM Scot Arey via RE-wrenches < [email protected]> wrote: > I knew it was Enphase that told me this! > > Let me say publicly your tech support team is marvelous. Thanks for note. > > Howard "Scot" Arey > Owner, Solar CenTex > 254-300-1228 > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
