Schnieder MPPT 100/600 charge controllers have in their menu a place to change the “MPPT” voltage setting from 600VDC down to 195VDC. In doing so all it seems to do is disable the controller and displays the screens; operating , not charging. I was trying to use this setting as I have a small array, (no room for any more then 5) 405 modules) a distance from my batteries. I am old enough to be quite aware of “VAPOR WARE” and old enough to know that there may be someone that has reset this setting and actually had it function. Manufacture alledges it “should work”………..NO white paper or any additional info from SE Solar either. Anyone? > Tump > <blocked::mailto:[email protected]%22%20%5Co%20%22blocked::mailto:[email protected]>[email protected] > www.SWNL.net > <blocked::http://www.swnl.net/%22%20%5Co%20%22blocked::http://www.swnl.net/> > Solarwinds Northernlights > Serving Mid Coast Maine & Northern California > 207-832-7574 Cl. 610-517-8401 > > Blair "TUMP" May > ******** MAINE'S CHARTER ******** > NABCEP "Certified PV Installer" > > ******** MAINE'S CHARTER ******** > Trace Xantrex "Certified" Dealer / Installer" >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
