You can also build them with the interlock kits for (almost) whatever load center you like. https://interlockkit.com/shop/ Some of these are UL listed, some are not.
The disadvantage of this route is that they are typically made for a high ampacity main circuit breaker, probably overkill for most applications like this. On Thu, Mar 2, 2023 at 9:37 PM Jerry Shafer via RE-wrenches < [email protected]> wrote: > Wrenches > It might be easier to use the wire cabinet for the radian, but hey thats > just me > > On Thu, Mar 2, 2023, 9:47 AM Kristopher Schmid via RE-wrenches < > [email protected]> wrote: > >> Hi All, >> >> I have a stand alone system that was upgraded from an FX inverter to a >> Radian WITHOUT the companion load center. I would like to add an inverter >> bypass circuit to operate the house on generator power. There used to be a >> 4 slot breaker panel (SqD?) with the rocker switch preventing both breakers >> from being in the on position simultaneously. I have not been able to find >> it on the interweb. Anyone know of something out there that would meet my >> needs? >> >> Kris >> >> >> Shine On! >> >> Kris Schmid >> Legacy Solar, LLC >> 137 West 1st Avenue >> Luck, WI 54853 >> www.legacysolar.com >> 715-653-4295 >> NABCEP Certified PV Installation Professional >> Licensed Wisconsin Master Electrician >> BSEE >> _______________________________________________ >> List sponsored by Redwood Alliance >> >> Pay optional member dues here: http://re-wrenches.org >> >> List Address: [email protected] >> >> Change listserver email address & settings: >> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org >> >> There are two list archives for searching. When one doesn't work, try the >> other: >> https://www.mail-archive.com/[email protected]/ >> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org >> >> List rules & etiquette: >> http://www.re-wrenches.org/etiquette.htm >> >> Check out or update participant bios: >> http://www.members.re-wrenches.org >> >> _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > > -- Mac Lewis *"Yo solo sé que no sé nada." -Sócrates*
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
