I think the power factor will be very close to one for split phase.
What's the inverter specs say w/r to this? Chris
On 4/27/2023 5:10 PM, August Goers via RE-wrenches wrote:
Hi Wrenches,
We have a residential site with grid tied solar where there is an
electrician involved who has gotten into taking site readings and
thinks there is a power factor problem. My gut on it is that there is
some sort of measurement reading error, and that the power factor
should be around 1.
The electrician is using a Fluke 3540FC power monitor and has provided
a spreadsheet comparing active power to apparent power and calculating
power factor. See below (you might have to open the image and zoom in
to read it). This measurement was taken with a PV system running,
presumably sending some power back to the grid. Note that the phase B
active power measurement is negative (PV exporting to grid) and that
the apparent power is positive. This nets in a power factor that is
crazy low of 0.05.
Does anyone have experience about whether a meter like this can
properly measure these readings - maybe there is a setting error or it
can't deal with negative readings?
image.png
Best,
August
Luminalt
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here:http://re-wrenches.org
List Address:RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--
Christopher Warfel
ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
401-466-8978
<http://entech-engineering.com>
BEGIN:VCARD
VERSION:4.0
N:Warfel;Christopher;;;
TEL;VALUE=TEXT:401-447-5773 (c)
NOTE:Use the cell phone number for all communications. Thank you.
URL:https://www.entech-engineering.com
END:VCARD
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
