Wrenches,I second Tump's endorsement of No-Ox-Id "A Special" grease. It is not made for thermal conduction, but will fill the spaces in an electrical joint where gasses, vapors, or liquids might penetrate and cause corrosion over time. It is applied with a brush and only a very thin coating is sufficient. I use it on all connections that I don't solder.
Eric Stevens Vermont Made Energy Grafton VT
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
