Morning all
You may also want to look at the Victron products. They have a 1000 amp version called the Lynx distributor. Peter Giroux ASAE From: RE-wrenches <[email protected]> On Behalf Of Bradley Bassett via RE-wrenches Sent: Thursday, June 29, 2023 10:47 AM To: RE-wrenches <[email protected]> Cc: Bradley Bassett <[email protected]> Subject: Re: [RE-wrenches] Parallel Homegrid Stack'd Busbar Note that MidNite now also makes 2000A and 500A versions of their BCB. With two Sol-Ark 15k you do need to use the 1000A version with 275A each inverter. I can also confirm that you do need to use both of the battery terminals in the Sol-Ark 15k for full power, or the Homegrid bus bars that Jason shows. Brad Bassett On Thu, Jun 29, 2023 at 6:57 AM Jason Szumlanski via RE-wrenches <[email protected] <mailto:[email protected]> > wrote: Lloyd, Homegrid makes a busbar to combine the two terminals in the Sol-Ark 15k so it can accept a single 4/0 cable and retain the full output capacity. Apparently, Homegrid is the only battery on the market with the output capacity to do this. https://www.homegridenergy.com/stackd-series <https://mailtrack.io/trace/link/a0cf1afc125652c2027c1cbd7d5458266a2d118b?url=https%3A%2F%2Fwww.homegridenergy.com%2Fstackd-series&userId=1613865&signature=28245d1e93ba151a> Jason Szumlanski Principal Solar Designer | Florida Solar Design Group NABCEP Certified Solar Professional (PVIP) Florida State Certified Solar Contractor CVC56956 On Thu, Jun 29, 2023 at 9:43 AM Lloyd Hoffstatter via RE-wrenches <[email protected] <mailto:[email protected]> > wrote: Hi Maverick, Per tech support, you need to buss battery output(s) to both input breakers to get the full 275 Amp output. Best regards, Lloyd Lloyd Hoffstatter, M.S. Applied Solar Energy NABCEP Inaugural Certified PV Installer Emeritus Director, Sunstruck Consulting [email protected] <mailto:[email protected]> 845-657-8132 (office) 914-844-3404 (mobile) From: Mac Lewis via RE-wrenches <mailto:[email protected]> Sent: Thursday, June 29, 2023 8:27 AM To: RE-wrenches <mailto:[email protected]> Cc: Mac Lewis <mailto:[email protected]> Subject: Re: [RE-wrenches] Parallel Homegrid Stack'd Busbar Hi Jason, The Sol-Ark 15k has dual battery input terminals so they can be combined right inside. This could be a good option to consider. Thanks On Thu, Jun 29, 2023 at 6:17 AM Maverick Brown via RE-wrenches <[email protected] <mailto:[email protected]> > wrote: I recommend the Victron Lynx Power In or the Lynx Distributor. Thank you, Maverick On Jun 29, 2023, at 6:55 AM, Jason Szumlanski via RE-wrenches <[email protected] <mailto:[email protected]> > wrote: Hi all, I'm doing my first installation with two 24 kWh Homegrid stacks. They will feed two Sol-Ark 15k. I'm seeking recommendations on busbars for connecting this up in the most elegant way possible. Pictures speak 1,000 words, so if you have any I would appreciate it (off-list is fine). Jason Szumlanski Florida Solar Design Group _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] <mailto:[email protected]> Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
