Hi David I think although it is 450 volts out, the battery is actually moch lower voltage and has a buck boost charge controller. It bucks the voltage down to charge the battery and boost the voltage to serve the load. If you open the battery and rewire you will need a BMS, you can find on line but you need to know the battery voltages I think it is 3.8 to 4.1. NMC perhaps some one on line knows
On Fri, Jun 30, 2023, 11:40 AM David Katz via RE-wrenches < [email protected]> wrote: > I have an LG Chem RESU10H Battery that was originally sold with a > SunnyStorage inverter. Does anyone know if there is a way to turn on the > battery output terminals so it can be charged without the inverter. No > lights come on when you turn on the main switch and the output breaker. > There is a small terminal strip for control wires. There is a 12V + and – > terminal and a Batt En terminal. Does any one know if powering the Batt > En. Terminal turns it on? I am going to try that but I am not sure what > voltage that terminal wants to see. > > Thanks > > David Katz > > > > David Katz > > *President* > > *www.tamaracksolar.com <http://www.tamaracksolar.com/>* > > (707) 222-6240 Ext: 105 | (707) 832-7487 > > [email protected] > > > > > > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
