Hi Jerry
What equipment are you using to pull steel from that depth?
Jay Hey wrenches Water leaks in wells, I just pulled my well pump out at a mere 390 feet, older galvanized 11/4 « steel, where the Water rose and dropped the pipe was is poor shape, not leaking yet but it will l suggest if the pump is pul l Ed then replace it with well pipe either sch 80 or 120 depending on the depth. Fun times On Sun, May 26, 2024, 11:14 AM Darryl Thayer via RE-wrenches < [email protected]> wrote: I had a similar pipe leak. I forgot how I located it, but I used a vaccumn gauge or pump and to determine how far down the well the the leak was and pulled the pump and pipe and found a crack.
On Sat, May 25, 2024 at 8:41 PM Bradley Bassett via RE-wrenches < [email protected]> wrote: I have a water system with a Grundfos SQFlex SQF3-2 pump. I'm getting water flow in reverse either through the pump or a leak up to the pump. My question is if the check valve on the top of the pump is not sealing, will the progressive cavity pump allow water to flow through the pump in reverse? I'd think that with a positive displacement pump it would not, except very slowly or if it turned the motor backwards which I think would be very unlikely. There is about 100 psi head on the pump.
I think it's most likely I have a leak somewhere in the plumbing, and of course another failed check valve farther up in the plumbing. It's possible to get failures even with redundant protection if you have two concurrent failures, which I must have here.
Brad Bassett Old time solar guy who used to do solar pumping back in the '80's and '90's. Mostly retired now.
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
|
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
