Hi Wrenchers, I am trying to get an old Trace SW5548PV inverter system up and running again. This inverter is gird tied only and does not have any batteries. While I am familiar with the battery based systems, I am not familiar with this system and the menus quite are different.
Right now, the inverter will blink the line-tie LED, then try to connect, the LED stops blinking, but the inverter LED does not come on and no power is produced. I want to make sure I understand the settings and make sure they are correct before I decide to recommend a new complete system. I have searched on-line for this manual but have not been able to find the PV only version of this SW inverter. Thanks, David _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
