I'm somewhat new to the solar industry and I'm starting to break into programming and more computer involved skills of solar. I primarily do small cabins and service work, but have been a part of some decent residential systems. Does anyone have any good literature and/or videos of updating firmware on Outback Mate3 controllers. I've seen instructions, but I hear little tricks/tips that are not at all in the instructions. I'm looking for a really good, detailed instruction sheet so I can keep it for reference. Thanks for any responses.
-- Jim with Gowdy Electric Cambria, Ca 93428 business 805 927 2630 cell 805 975 5279
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
