I've got a few installs with the XWMPPT60-150 with Lithium. Deka Duration, closed loop via Insight Home, programmed to allow BMS voltage to drive the MPPT. Have several of this configuration.
One site upon initial setup was giving constant High Voltage mid day shutdowns on the inverter when batteries at 100% (SW4048) despite logging not showing battery voltage going above 54V. Schneider tech support was beyond useless waste of time. Only way I got this to stabilize was setting the inverter High Voltage shut down to 60V. 58V was still getting the error intermittently. Not ideal but at least the client wasn't having their cooling units without power until they got home from work to reset the inverter. Kevin -----Original Message----- From: RE-wrenches <[email protected]> On Behalf Of Jay via RE-wrenches Sent: August-30-24 1:53 PM To: RE-wrenches <[email protected]> Cc: Jay <[email protected]> Subject: [RE-wrenches] Schneider mppt 60-150 question Hi all. Any issues with the xw 60-150 operating lithium batteries? Namely that they are fast enough in their regulation Thx Jay _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org _______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
