I used Chilicon on a couple installs, and Enphase is far better.
On Mon, Sep 23, 2024 at 9:05 PM greg egan via RE-wrenches < [email protected]> wrote: > Good intel. I believe their micros are rated to -40C/F. If they quit > working at that temp it would be okay as long as they start back up when > if warms up. Normally when it's that cold the sun is pretty scarce at > this latitude. > > Greg Egan > Remote Power Inc. > Fairbanks, AK > > On 9/23/2024 7:47 PM, MDElectricSolar wrote: > > Been around forever, good tech support, the products have been improved > and refined, easy to install, good monitoring platform. Not sure how they > would fare in Alaskan winters though… > > > > Maybe an sma installed indoors? > > > > Michael D Nelson > > MD Electric & Solar, Inc. > > 707-684-0064 mobile > > 707-884-1862 office > > www.mdelectricsolar.com > > www.facebook.com/mdelectricandsolar > > > > > >> On Sep 23, 2024, at 8:41 PM, greg egan <[email protected]> wrote: > >> > >> Michael, thank you. Any particular reason you like them best? > >> > >> > >> Greg Egan > >> Remote Power Inc. > >> Fairbanks, AK > >> > >>> On 9/23/2024 7:29 PM, MDElectricSolar wrote: > >>> Enphase… > >>> > >>> Michael D Nelson > >>> MD Electric & Solar, Inc. > >>> 707-684-0064 mobile > >>> 707-884-1862 office > >>> www.mdelectricsolar.com > >>> www.facebook.com/mdelectricandsolar > >>> > >>> > >>>>> On Sep 23, 2024, at 7:30 PM, greg egan via RE-wrenches < > [email protected]> wrote: > >>>> Esteemed wrenches, > >>>> > >>>> Have a client that is grid connected (not my usual client) and > looking to do solar without back up. Has shading issues so I'm thinking > micros would work best for this application, plus take care of rapid shut > down without needing extra devices/wiring. Problem is I have not ever > installed micros. > >>>> > >>>> Any recommendations on brands /models that have been reliable? Decent > tech support? Customer just wants something that works and is relatively > simple to navigate the online monitoring. Probably 4-5 kW so not a huge > system. > >>>> > >>>> Thanks in advance, I appreciate it! > >>>> > >>>> Greg Egan > >>>> Remote Power Inc. > >>>> Fairbanks, AK > >>>> _______________________________________________ > >>>> List sponsored by Redwood Alliance > >>>> > >>>> Pay optional member dues here: http://re-wrenches.org > >>>> > >>>> List Address: [email protected] > >>>> > >>>> Change listserver email address & settings: > >>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > >>>> > >>>> There are two list archives for searching. When one doesn't work, try > the other: > >>>> https://www.mail-archive.com/[email protected]/ > >>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > >>>> > >>>> List rules & etiquette: > >>>> http://www.re-wrenches.org/etiquette.htm > >>>> > >>>> Check out or update participant bios: > >>>> http://www.members.re-wrenches.org > >>>> > > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
