Hey folks,A customer I installed a system for 18 years ago now wants an upgrade, partly due to the Mitsubishi 170's high failure rate and the purchase of an EV. The Mission PVs I'm looking at (at a deal I 'can't' refuse) have a rated current of just over 13 amps, a string of 10 is easily below the Voc limit. The specs for the SB6.0-1SP-US-41 show a max current per mppt of 10 amps. I've never "pushed" this max amps limit quite this much, is there a problem? I assume the inverter will just clip the input to 10 amps midday.
Would love some input, thanks, Bill Feather River Solar Electric Bill Battagin, owner 4291 Nelson St. (Shipping) 5575 Genesee Rd. (USPS, UPS) Taylorsville, CA 95983 530-284-7849, 258-1641(cell) CA. C10 Lic # 874049 Solar Powered since 1982 Home of the Sunny Side Up -- This email has been checked for viruses by Avast antivirus software. www.avast.com
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
