I recommended Pytes because it’s a heated battery, rack, mountable, and scalable to about 400 kWh.
I will also second Jay’s comment about MidNite because I just installed three powerflo16 batteries on an XW Pro and they are also heated. They should communicate with SolArk since they use pylontech protocol. I’m sure by now the Internet can confirm that. Thank you, Maverick Maverick Brown Off-Grid Solar Commander since 2006 Maverick Solar Enterprises, Inc. • Solar Commander Remote Power • SunFlow Systems Cathodic Protection [email protected] 512-460-9825 > On Dec 9, 2024, at 10:57 AM, Sam Haraldson <[email protected]> wrote: > > >> You didn’t mention the kilowatt hours that you’re needing, but I can imagine >> it’s quite a lot. I recommended the Pytes V5 battery. > > Good point, Maverick, sorry for leaving out that detail. This particular > instance will require 45 kWh of storage. Thank you for the Pytes > recommendation. > > - Sam
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
