Hi all, I am going to be checking out a site next week where there is an old Solar Edge system not producing. It stopped working when someone installed a Tesla battery system. I was not part of either installation, but am being called in to get the solar working again. Supposedly the Tesla installer has been back a couple times and could not figure it out. I am guessing that the SolarEdge inverter is the one before the HD Wave, so maybe a SE11400A inverter.
I am not a Tesla installer, and not familiar with their equipment. Assuming there are no dumb installation mistakes, does anyone know whether there are any programming nuances that might affect the AC coupling? Or anything else that I maybe should be looking for when troubleshooting this one? Thanks! -Dave -- [image: Logo] <https://www.sungineersolar.com/> Dave Tedeyan, P.E. Owner | Sungineer Solar p: he | him | his a: 1653 Slaterville Rd. | Ithaca, NY 14850 w: www.sungineersolar.com <http://www.sungineersolar.com/> c: (607) 270-0370
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
