Folks, I am going to have a steel frame for my stand alone power supply to be dropped on the ground out in the elements.
I was planning to weld a stainless bolt to the mild steel frame to provide a corrosion resistant point of connection. I am getting a lot of push back on this. What are other folks do to create a connection for a system grounding electrode conductor on a piece of equipment like this? Thanks, Mark Frye
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
