Hi Mick;
I have a 100 A model with the mechanical lugs, low profile, made for
surface mount, like you're looking for. I've seen them referred to as
a medium body Heinneman breaker. This is surface mount vs panel mount
which has the studs off the back.
Ray Walters
Remote Solar
On 3/11/2025 2:20 PM, Bradley Bassett via RE-wrenches wrote:
Those part numbers indicate an item from between 2003 and 2008 from
AEE. I don't remember what they are though, and do not see those items
codes in any old AEE catalogs. Besides Schneider, Magnum also sold
similar breakers in 70A and 100A I think. You could probably source
them from a breaker distributor but at much higher cost.
Brad Bassett
On Tue, Mar 11, 2025 at 11:21 AM Mick Abraham via RE-wrenches
<re-wrenches@lists.re-wrenches.org> wrote:
Hello, Mechanics~
I sold this early GFI for PV arrays to a homeowner decades ago.
Page 2-5 of the attachment mentions a custom enclosure from AEE
Solar; AEE part number 53.0090 and breaker mounting plate 53-0094.
I'm sure that's probably what I bought for mounting the GFP
assembly. The breaker plate is pre punched to fit the mounting
tabs on back of these CF style breakers. This may also be known as
an E-series breaker.
I suspect this box was a joint project involving Dave Katz & Robin
Gudgel. Now I need to add a suitable single pole DC breaker but
all I have found so far are those with terminal studs that poke
out out the back of the breaker. Two different eBay vendors had a
photo that looked right but the product they shipped had the
studs. I'm sure the breaker is non-custom but I haven't found an
easy source for quantity one.
I think the breaker body is 1" wide. Ideal specs would be 100 amp
rated, and any voltage rating above 50. 80 amp rating would
probably also work. It's for a 24v battery off grid setup. If
anyone has a part they could sell to me, please reply off-list
with a description of the age & condition, & requested prepayment
including slow boat shipping to the SLC region, Utah.
OR: if anyone could suggest a vendor who's likely to have this,
all suggestions would be welcomed. Thanks in advance; the Wrench
List is the Bomb~
Mick Abraham, Proprietor
www.abrahamsolar.com <http://www.abrahamsolar.com>
Cell phone or for text messaging: 970-946-6584
ᐧ
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work,
try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here:http://re-wrenches.org
List Address:RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
