Hi all, Just a quick tip/warning. We use the iTools Gear Punch extensively, and love it.
https://itoolco.com/product/gear-punch-knockout-set-1-2-4/ Unfortunately, the plastic bushings supplied with the Midnite AIO are too large to fit the 2-in knockout holes produced by this gear punch. The 1-1/4 bushings work well. I am going to try to see if another die set works with the punch tool. Does anyone know a brand that works for sure with these bushings? P.S. Some brands of PVC box adapters don't fit well in the holes produced by the iTools die, either. All terminal adapters work in our experience. Jason Szumlanski Florida Solar Design Group
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
