Sometimes spraying soapy water onto the suspect panel is enough to recreate the issue. A simple spray bottle will do.
I am having the same issue, but it is with an SMA inverter. In my case it happens when it is raining and clears up when it dries out. I can see there are some bad cells, but they are right next to the edge of the panel so a moisture problem would show up this way. Good to know about sealing the conduits.
In your case, you should be able to disconnect the suspected string or jump around the suspected panel and figure this out. Other wise I would blame it on the squirrels. But then again, I blame everything on rogue squirrels or rats.
David
On May 8, 2025, at 12:55 PM, david quattro via RE-wrenches < [email protected]> wrote:
Fronius install manual says the conduit entry ports need to be packed with putty around the wires. They’re the only manufacturer I know of that requires this. Water vapor roses into the circuit boards. I used to get a couple different error codes until we packed the conduits. Good luck, and let us know!
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.orgList Address: [email protected]Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.orgThere are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/ [email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
_______________________________________________List sponsored by Redwood AlliancePay optional member dues here: http://re-wrenches.orgList Address: [email protected]Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.orgThere are two list archives for searching. When one doesn't work, try the other:https://www.mail-archive.com/[email protected]/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.orgList rules & etiquette:http://www.re-wrenches.org/etiquette.htmCheck out or update participant bios:http://www.members.re-wrenches.org
|
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org