Friends:
I have a client with one VFXR3648A inverter off-grid with PV and a generator. The inverter is set to bulk at 58.2 VDC for 2 hours but when the generator is required the voltage never gets above 52 VDC. The PV gets the voltage up to the 58 volt zone reliable. The original generator was a portable of about 3 Kw. I thought it was not providing enough RMS power so we upgraded to a Kohler vertical shaft 12 kW air cooled unit. The problem is still the same: The bulk voltage of the batteries never gets above 52 VDC. On my next visit I plan on resetting the inverter to factory defaults. Other than that I am not sure what to try. I have little luck reaching Outback tech support in the last year so I am hoping someone here can provide some advice. Thanks in advance. William Miller Solar 17395 Oak Road, Atascadero, CA 93422 805-438-5600 www.millersolar.com CA Lic. 773985
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
