I’ve used iota and power max and they don’t care very much about power quality.
The charge verter from eg4 is 120 or 240 and has both voltage and amperage adjustments.
Jay Hi Mark,
It will stall the generator and/or it will shutdown on overload and or trip a breaker.
However, many battery chargers have some adjustability so you may be able to adjust it down to the sweet spot. The way I like to do it is start with the charger very low, then slowly adjust the load up. At some point, the generator will sound like its working hard but not overloaded. Just know that you may need to adjust this for various operating conditions (temperature is the big one) or if you are moving it around, elevation.
Be prepared to be disappointed by the generators performance, battery chargers can be difficult loads for low quality generators.
Mac Lewis "Yo solo sé que no sé nada." -Sócrates
_______________________________________________List sponsored by Redwood AlliancePay optional member dues here: http://re-wrenches.orgList Address: [email protected]Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.orgThere are two list archives for searching. When one doesn't work, try the other:https://www.mail-archive.com/[email protected]/http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.orgList rules & etiquette:http://www.re-wrenches.org/etiquette.htmCheck out or update participant bios:http://www.members.re-wrenches.org
|
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org