In.years past, installing assempled Trace power panels, we used 2 farm jacks with a 2x4 between them...just went.low enough to.get under the bottom SW 6048, then slide them up the wall and bolt to wall. Ken Schaal Commonwealth Solar Ll
On Sat, May 9, 2026, 5:04 PM Zeke Yewdall via RE-wrenches < [email protected]> wrote: > One of my installers in western CO uses a lifting dolly -- he does a lot > of double stacked setups with 6 to 12 batteries in a system, with lower row > of batteries 2 or 3 inches off the ground and an upper row of > batteries about 3 feet off the ground. > > EG4 sells a lifting dolly especially made for their wallmount batteries > for about $1100, and Vevor has a few models of lifting dollies for around > $400. They are commonly used for woodstoves and safes and boilers and such > as well, not just batteries. > > Zeke > > >> For those of you that have wall mounted the PF 16 battery, can you share >> techniques and or equipment methods? >> I can get my engine hoist into the building and I was hoping to sling the >> battery to get it up there. Plan is to mount one above another with 10-12? >> of clearance. >> Does MidnitePower make anything for this ? >> >> Jeremy Rodriguez >> All Solar Inc. >> Penrose CO >> 719-276-4954 >> Established 1998 > > -- > Zeke Yewdall > PV Engineer > NABCEP #031508-89 > [email protected] > 303-523-3592 > _______________________________________________ > List sponsored by Redwood Alliance > > Pay optional member dues here: http://re-wrenches.org > > List Address: [email protected] > > Change listserver email address & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > There are two list archives for searching. When one doesn't work, try the > other: > https://www.mail-archive.com/[email protected]/ > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > http://www.re-wrenches.org/etiquette.htm > > Check out or update participant bios: > http://www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
