Hey all you Wise ones, I have a new client - new neighbor that is purchasing a house with a 4.2 KW thin film array adhered to the standing seam metal south roof of the house. Installed in 1999 as 4.2KW today it only puts out 1.6 kw peak at noon. See NO attached pics.
Obviously, it needs to be upgraded to current modules but does the film need to be removed? It is a hazard when disconnected? Could it short out and cause a fire? It is very firmly attached still & might possibly remove the paint. No attempt has been made to remove yet. If you have had to remove thin-film what/how did you do it. They have not taken possession of the house yet so I do not have access to the house yet. Thoughts, suggestions, & comments welcomed. Thank you in advance for the input. _________________________________________________________ Dana Orzel GREAT SOLAR WORKS! C - 208.721.7003 E - [email protected]<mailto:[email protected]> W - www. greatsolarworks.com www.solarwork.com<http://www.solarwork.com/> "Responsible Technologies for Responsible People since 1988!"
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
