Bill - we encountered the same issue with our only Fortress installation & used
a larger CT with same spec.
If you have an issue we found the most amazing Fortress tech, contact me direct
for info.
He is in Mexico. The guy is Steller!
_________________________________________________________
Dana Orzel GREAT SOLAR WORKS!
C - 208.721.7003 E - [email protected]<mailto:[email protected]>
W - www. greatsolarworks.com www.solarwork.com<http://www.solarwork.com/>
"Responsible Technologies for Responsible People since 1988!"
--- Begin Message ---
Friends:
I am installing my second Fortress Envy8 inverter and I am encountering the
same problem for the second time: The supplied CTs are too small to clip
around the service-entrance conductors. I contacted Fortress and they were not
much help. They said try Aim Dynamics, without specifying a product.
The CTs provided are rated at 100 Amp / 100 mA. This means they have a 1000 to
1 ratio. Is it valid to say I could replace the provided CTS with any CT that
has the same ratio? I have found this to be true when contemplating DC
resistive shunts, like for the Outback FNDC.
Thanks in advance.
William Miller
William Miller
Miller Solar
www.millersolar.com<http://www.millersolar.com/>
CA License C-10 77398
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
--- End Message ---
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: [email protected]
Change listserver email address & settings:
https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/[email protected]/
https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
