A pair of the DEWALT TOUGHSERIES Portable Construction Jack works well for this. I just installed a dozen of these batteries on my own using those. Lift the battery up above the bracket, push it back a bit, lower one side at a time till it is in the slots then lower down.
Kevin From: RE-Wrenches <[email protected]> On Behalf Of [email protected] Sent: Wednesday, October 28, 2026 10:57 AM To: RE-wrenches <[email protected]> Subject: [Re-wrenches] EG4 314 AH Battery Hello All, Has anyone mounted an EG4, 314 Wall Mounted, heated battery without a lift? It weighs almost 300 pounds, which is too much for 2 people to wrestle with. I read the book William recommended, Moving Heavy Things. (Thank you William). It might be possible to use a Come Along under a construction of lumber, if there is sufficient hardware to connect ropes to. Or, is a lift the only way to go? How do you mount these batteries? Thank you, Drake -- Drake Chamberlin Athens Electric LLC Ohio Electrical Contractor’s License 44810 NABCEP Certified PV Installation Professional
_______________________________________________ List sponsored by Redwood Alliance Pay optional member dues here: http://re-wrenches.org List Address: [email protected] Change listserver email address & settings: https://lists.re-wrenches.org/mailman/options/re-wrenches_lists.re-wrenches.org/ There are two list archives for searching. When one doesn't work, try the other: https://www.mail-archive.com/[email protected]/ https://lists.re-wrenches.org/pipermail/re-wrenches_lists.re-wrenches.org/ List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out or update participant bios: http://www.members.re-wrenches.org
