On May 20, 2006, at 5:58 AM, Norman Palardy wrote:
On May 19, 2006, at 9:36 PM, Sven E Olsson wrote:
On May 20, 2006, at 5:00 AM, E. Tejkowski wrote:
Tested with 10.4.6 on a PPC(G4). Didn't call any methods myself.
Just ran your demo
project._______________________________________________
Ok, What do you get when you click on CPU Type?
Norman Palardy
OS X 10.4.6 / MacBook Pro 2.16Ghz MHz / 1Gb RAM
correct items
- machine name is correct
- model is correct (I think) it says MacBookPro1,1
- cpu type Intel Core Duo
- number of cores 2
- cpu speed 2.16 Ghz
incorrect
- 2 MB when clicking the Memory button ( I get the right value
when clicking Boot Rom Ver )
- 1 GB when clicking on bus speed
- 667 Mhz when clicking boot rom version
- and several more like the buttons label is not what is being
shown but is "off by one"
so I poked about
Hi,
Interesting, here I have a Intel box and a PPC G4...
As I wrote they have not the same 'table list' ... So First of all I
check the CPU Type (That is the same table on my Intel and PPC).
When I know what PPC or Intel then I could swap some in the list to
get it correct here on my two machines...
I have just put a new version 0.0.2 there i changed the first check
of CPU Type
It would be interesting if some of you could send me a screen shot of
'About this Mac' --> More Info --> HardWare overwiew.
It would be nice to have a module like this that are safe...
Regards,
Sven E Olsson
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
