On OS X, you might wish to review the mount command:
>>>
SPC:~ sp2$ mount
/dev/disk0s2 on / (local, journaled)
devfs on /dev (local)
fdesc on /dev (union)
<volfs> on /.vol
automount -nsl [216] on /Network (automounted)
automount -fstab [224] on /automount/Servers (automounted)
automount -static [224] on /automount/static (automounted)
/dev/disk1s0 on /Volumes/DBcdS06 (local, nodev, nosuid, read-only)
<<<
Maybe some switches print the required details.
Am 23.05.2006 um 19:37 schrieb Craig Hoyt:
Thanks Emile and Kurt,
I actually did do a search in the archives. Here's what I found.
There was a stellar example provided by Dave but his solution
required a plug-in to pass RB volume #'s (untested!). I need to
keep this plug-in free. Charles also made a cryptic comment stating
that one should use: Volume(Index).ShellPath as a method. I found
nothing in the RB Docs to support this. Please point me in the
direction if I have missed something. It seems that RB's Volume
class is missing quite a few properties that would make it
completely usable.
Craig
Another possible way is to make a search of the one already sent
to this
list using the List Archive(link at the bottom).
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
