Herald,
Do you see the correct data in Hyperterminal, or is it also junk?
If Junk -> your hardware interface is bad.
If GoodData -> You've got a setting off (baud/parity/handshake
settings) in RB.
good luck. RB really does work for serial stuff, I use it all the time.
On Jun 26, 2006, at 10:25 AM, Harald Schneider wrote:
Hi,
I use a Serial control, which collects incoming data via its
DataAvailable() event. The result of .ReadAll() is appended to a
Editbox. The problem: Instead of ASCII Text, I see only squares and
other trash ...
The sender is a terminal program, connected with a nullmodem cable.
Both use the same transmisson parameters (baud etc.)
I also tried different encodings without success ...
Platform RB2006r2, Windows XP.
Any hints?
Thanks,
Harald
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
