Note to all users of FTP Suite:
On Sep 1, 2006, at 4:04 PM, David Glass wrote:
So, I turned off the Windows firewall and everything works
swimmingly. Obviously, running without the firewall is not option,
so I'll have to figure something out to make this work.
However, it does beg the question: Why do all the other commands,
including file transfer, work without issue and it is only the
'logoff complete' message that is blocked?
As it turns out part of Mr. Glass' issue was a typo in the FTP Suite
manual (Page 20):
PassiveMode As Boolean
When set, all FTP operations will take place with the server in the
passive mode. The default setting is False (active mode).
This is wrong, the default is True. So you need to use
"Self.FTPSession.PassiveMode = False" if you need Active mode. This
is a very old typo. It's never come up before because PASV is used
almost exclusively because it is safer.
Thanks
--
Joseph Nastasi
Pyramid Design - a software development firm
http://www.pyramiddesign.us
Voice 609 601-0814 Fax 609 601-0815
Products:
A-OK! The Wings of Mercury http://www.aokwom.com
A-OK! Spacecraft Simulation System - http://www.aoksss.com
FTP Suite for REALbasic - http://www.ftpsuite.com
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
