Hi Seth,
some example code available?
thanks in advance
Roland
Am 07.12.2006 um 17:50 schrieb Seth Duke:
On 12/7/06 9:52 AM, "Detour" <[EMAIL PROTECTED]> wrote:
What platform(s) are you developing for? My experience is with OSX,
and with that I've used a National Instruments USB based device with
RB using declares, and I also have the Activewire board, also USB,
for which there is a third party driver and support for RB available.
The NI is more robust, also more expensive and the declares take some
getting used to, the Activewire is cheaper, less featured, easier to
get into. Don't know enough about the others out there.
Greg
I bought an Ethernet based I/O card. Never really built anything
meaningful
with it, but did manage to turn some lights on and off for fun.
Pretty simple to use in Rb since all you need is a UDP sock to get/
set the
state of the board.
<http://elexol.com/IO_Modules/Ether_IO_24.php>
The make a lot of addons for this card as well.
A lot of online hobby stores carry this. I bought mine from
<http://www.hobbyengineering.com/SectionIN.html>.
-Seth
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
_______________________________________________
Unsubscribe or switch delivery mode:
<http://www.realsoftware.com/support/listmanager/>
Search the archives of this list here:
<http://support.realsoftware.com/listarchives/lists.html>
