09-03-2002 22:16:35, Nenad Rakocevic <[EMAIL PROTECTED]> wrote:
>
>Hi,
>
>As far as i understand, this kind of errors occurs because the FTP handler doesn't
>recognize the response code sent by
>the server.
OK
>Try this patch before starting your ftp session :
>
>>> system/schemes/ftp/handler/rmfile-check/2: ["250" "226"]
>>> append system/schemes/ftp/handler/read-check/2 "200"
>When you encounter such error, you should turn trace/net on and if possible, send the
>log to the ml.
>
>HTH,
>
>-DocKimbel.
>
ok, thanks, I tried it and this is the result from a fresh new rebol session
(usernames, passwords and urls removed):
>> system/schemes/ftp/handler/rmfile-check/2: ["250" "226"]
== [
["DELE" port/locals/file] ["250" "226"]
]
>> append system/schemes/ftp/handler/read-check/2 "200"
== ["150" "125" "200"]
>> trace/net on
>> ftp-dir: ftp://<user>:<pass>@<url>/path/
== ftp://<user>:<pass>@<url>/path/
Now I tried reading the directory which was empty:
>> print read ftp-dir
URL Parse: <user> <pass> <url> none path/ none
Net-log: ["Opening" "tcp" "for" "FTP"]
Net-log: [
none ["220" "230"]]
Net-log: {220 ProFTPD 1.2.1 Server (<path>)}
Net-log: [
["USER" port/user] "331"]
Net-log: "331 Password required for <user>."
Net-log: [
["PASS" port/pass] "230"]
Net-log: "230 Welcome to <server>"
Net-log: [
"SYST" "*"]
Net-log: "215 UNIX Type: L8"
Net-log: [
["PORT" port/locals/active-check] "200"]
Net-log: "200 PORT command successful."
Net-log: [
["CWD" either empty? port/path ["./"] [join "./" port/path]] "250"]
Net-log: "250 CWD command successful."
Net-log: [
["TYPE A"] ["200"]]
Net-log: "200 Type set to A."
Net-log: [
["LIST"] ["150" "125"]]
Net-log: {150 Opening ASCII mode data connection for file list.}
Net-log: [
none "226"]
Net-log: "226-Transfer complete."
Net-log: [
["PORT" port/locals/active-check] "200"]
Net-log: [
"PASV" "227"]
** User Error: Server error: tcp 200 PORT command successful.
** Near: print read ftp-dir
Same as before.
Then I put a file there manually with an FTP-program:
>> print read ftp-dir
URL Parse: <user> <pass> <url> none path/ none
Net-log: ["Opening" "tcp" "for" "FTP"]
Net-log: [
none ["220" "230"]]
Net-log: {220 ProFTPD 1.2.1 Server (<server>)}
Net-log: [
["USER" port/user] "331"]
Net-log: "331 Password required for <user>."
Net-log: [
["PASS" port/pass] "230"]
Net-log: "230 Welcome to <server>"
Net-log: [
"SYST" "*"]
Net-log: "215 UNIX Type: L8"
Net-log: [
["PORT" port/locals/active-check] "200"]
Net-log: "200 PORT command successful."
Net-log: [
["CWD" either empty? port/path ["./"] [join "./" port/path]] "250"]
Net-log: "250 CWD command successful."
Net-log: [
["TYPE A"] ["200"]]
Net-log: "200 Type set to A."
Net-log: [
["LIST"] ["150" "125"]]
Net-log: {150 Opening ASCII mode data connection for file list.}
Net-log: [
none "226"]
Net-log: "226-Transfer complete."
file.txt
Which seemed to work just fine
Then I tried to read the contents of the file:
>> print read join ftp-dir ["file.txt"]
URL Parse: <user> <pass> <url> none path/ none
Net-log: ["Opening" "tcp" "for" "FTP"]
Net-log: [
none ["220" "230"]]
Net-log: {220 ProFTPD 1.2.1 Server (<server>)}
Net-log: [
["USER" port/user] "331"]
Net-log: "331 Password required for <user>."
Net-log: [
["PASS" port/pass] "230"]
Net-log: "230 Welcome to <server>"
Net-log: [
"SYST" "*"]
Net-log: "215 UNIX Type: L8"
Net-log: [
["PORT" port/locals/active-check] "200"]
Net-log: "200 PORT command successful."
Net-log: [
["CWD" either empty? port/path ["./"] [join "./" port/path]] "250"]
Net-log: "250 CWD command successful."
Net-log: [
["TYPE A"] ["200"]]
Net-log: "200 Type set to A."
Net-log: [
[join "LIST " port/target] ["150" "125"]]
Net-log: {150 Opening ASCII mode data connection for file list.}
Net-log: [
none "226"]
Net-log: "226-Transfer complete."
Net-log: [
["PORT" port/locals/active-check] "200"]
** User Error: Server error: tcp 226 Quotas on: using 0.00 of 10.00 MegaBytes
** Near: print read join ftp-dir ["file.txt"]
Again same error as before.
Just to make sure:
>> print join ftp-dir ["file.txt"]
ftp://<user>:<pass>@<url>/path/file.txt
The syntax for the URL is correct.
>> system/version
== 1.2.1.3.1
and it's Rebol/View I'm running.
Regards,
Henrik Mikael Kristensen
--
To unsubscribe from this list, please send an email to
[EMAIL PROTECTED] with "unsubscribe" in the
subject, without the quotes.
