G=E9rard Thanks a lot .... I will check them out.
Emeka On Thu, Sep 2, 2010 at 1:46 PM, Steve Oldner <[email protected]> wrote: > > G=E9rard, > > Thank you very much! > > I have seen REBGui but have not used it. Your information puts it into > per= > spective. > > Steve Oldner > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > G= > =E9rard C=F4t=E9 > Sent: Thursday, September 02, 2010 7:37 AM > To: [email protected] > Subject: [REBOL] Re: GUI layout > > Hi Emeka, > > > Dne 2.9.2010 9:34, Emeka napsal(a): > > > Hello All, > > > > > > I know that in REBOL View you can use across word to direct GUI > > components. > > > Is there something like layout manager for GUI? I would like to divide > my > > > window into two, one EAST , one WEST or even SOUTH and NORTH. > > > > > > Regards, > > > Emeka > > > > > For real work I suggest you to go directly at the RebGUI entry below to see > what it can offer to you > > > Launch REBOL/View in console mode and enter the following 2 lines of code. > > do http://www.dobeash.com/RebGUI/get-rebgui.r > do view-root/public/www.dobeash.com/RebGUI/tour.r > Other reference sources about RebGUI can be found at the end of this post. > The above extract come from these sources. I simply wanted to begin by what > I found to be the most useful to you ... > > For your general information about VID may be these other scripts can be > useful to you too. > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > A layout mini-editor from Carl S.: > http://www.mail-archive.com/[email protected]/msg07771.html > A script demo for getting a dual columns layout using across : > http://www.rebol.org/view-script.r?script=3Ddual-col.r&sid=3Dkd85hy > Different ways to get a layout (Static or dynamic) : > http://onlamp.com/pub/a/onlamp/2003/10/30/rebol.html > > The other information I found for you is from the official Library serach > engine found here : http://www.rebol.org/search.r > Trying to get some info from "Carl layout editor" got me these results > belo= > w > : > > REBOL/Layoutlayout.r< > http://www.rebol.org/view-script.r?script=3Dlayout.r&s= > id=3Dppfb454gz> > v:0.1.7 > 35.7 KB > 13 Mar 2003Visual Layout Editor > author: Carl SassenrathGraphical Layout > Editorlayed.r< > http://www.rebol.org/view-script.r?script=3Dlayed.r&sid=3Dppf= > b454gz> > v:1.0.1 > 1.6 KB > 13 Mar 2003Your basic 1K REBOL graphical object layout editor. Not many > features, but a good example of how to drag faces and show nubs. > author: Carl SassenrathREBOL/Layoutlayout-1.8.r< > http://www.rebol.org/view-s= > cript.r?script=3Dlayout-1.8.r&sid=3Dppfb454gz> > discussion <http://www.rebol.org/discussion.r?script=3Dlayout-1.8.r > >v:0.1.= > 8 > 37.1 KB > 13 Mar 2003Visual Layout Editor, now accepts more than 6 layouts > author: Carl Sassenrath, Ammon Johnson > > > > > This time, using the keyword "panel" as the search keyword I got : > > > RebGUI span Examplerebgui-sizing.r< > http://www.rebol.org/view-script.r?scrip= > t=3Drebgui-sizing.r&sid=3Drcyc183kn> > documentation < > http://www.rebol.org/documentation.r?script=3Drebgui-sizing= > .r> > v:1.0.0 > 1.9 KB > 5 Jun 2007RebGUI tutorial; display images, with widget span and window > resizing > author: Brian Tiffin > > > While speaking of RebGUI, I found these widgets in their widgets reference > documentation (http://www.dobeash.com/RebGUI/widgets.html) > that could be useful to you : > > 28- Scroll-panel : http://www.dobeash.com/RebGUI/widgets.html#section-28 > 32- Splitter : http://www.dobeash.com/RebGUI/widgets.html#section-32 > > > This old discussion thread below can also be useful to you : > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > http://www.mail-archive.com/[email protected]/msg03229.html > > > > And finally - but not the least - here are some real demos about what can > d= > o > RebGUI for you : > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > > Simply launch REBOL/View in console mode and type the following at the > prompt : > > do http://www.dobeash.com/RebGUI/get-rebgui.r > do view-root/public/www.dobeash.com/RebGUI/tour.r > These instructions come from the following extract (taken from > http://community.livejournal.com/rebol) : > ------------------------------------------------------------- > > Carl's Blog Alert <http://community.livejournal.com/rebol/70435.html> > Fri, 23 Jun 2006 19:50:49 > *RebGUI - REBOL/View Graphical User Interface* > RebGUI is a good way to build user interfaces in REBOL. If you've not tried > it yet, you should. > > RebGUI takes many of the best concepts of VID (the visual interface > dialect= > ) > and provides a useful, smart, clean way to quickly build graphical user > interfaces in REBOL. > > To see a quick tour of RebGUI click on it in the Demos folder of the REBOL > Viewtop or type this URL into your REBOL/View GoTo box (or just DO it in > th= > e > console): > > http://www.rebol.com/rebgui-demo.r > > > The above script simply does this: > > do http://www.dobeash.com/RebGUI/get-rebgui.r > do view-root/public/www.dobeash.com/RebGUI/tour.r > > I should mettion that Ashley and his team at Dobeash Software have done a > nice job documenting RebGUI. Here's the main page where you can get > started= > : > > \in > > RebGUI Home Page > > /in > > For me, RebGUI is exactly the kind of thing I've wanted to see done in > REBOL. Remember, VID was/is a prototype. Back in 2001 I expected VID to be > replaced with something better in less than a year. VID had some unique and > cool ideas (e.g. dialected interface specification, datatyped property > dispatch, extensible), but also more than a few quirks and loose ends. > > Some of you have asked, "Is it ok to use RebGUI for my REBOL applications?" > I say yes! Use what works best for your needs and requirements. For many > types of applications, I think RebGUI is a good choice. > > *More here:* http://www.rebol.net/article/0280.html > > Even if I don't really program much using REBOL or anything else for now I > try to keep myself well informed ... for what value it can really have! > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= > =3D=3D=3D > > Regards, > Gerard > > > --=20 > To unsubscribe from the list, just send an email to=20 > lists at rebol.com with unsubscribe as the subject. > > -- > To unsubscribe from the list, just send an email to > lists at rebol.com with unsubscribe as the subject. > > -- To unsubscribe from the list, just send an email to lists at rebol.com with unsubscribe as the subject.
