Hi, Im currently testing some stuff with Red5.
Maybe anybody has an solution or even a explanation. Im running my Red5 Server local. Its the latest trunk version. 3 Client connect to my Server and connect to their streams. I connect with a local client too. We are connected to the same Router. My server is a Core Duo laptop with 1GB ram. First thing. While testing, i connected to the Server with a wrong Streamid, starting with a "undefined". What happend is that the Server hang and no roomLeave was executed. After some time, a cleanup process mentioned in the log that the process was not accessible anymore. I tested this behavior some more times. Its a pitty, that i have not set up a filelog output..... Second. I connected from now on with the right stream name, waited for the client publish. Everything works fine. Over each video i setup a bar indicating the live delay. The processor is about 20-30% (one core, so high because of the webcam and the flash display). After that i bound the wrapper to only the second CPU. Smoothly running with 5%. The first ten seconds, about 0.3 livedelay each video on every client EVEN the Client on the Server.... I checked the RAM... only used 600mb of 1gb. Suddenly the delay of one client run high, up to 3 seconds. After a time the other clients starts rising also. Again, ON the Server and client cams... They reach 1.5 seconds delay. The one cam starts rising the delay even higher reaching 9 seconds delay. Never going down..... I stopped the stream from the client, and switched it on again. The delay reduced to 1.5 seconds. But after some seconds it started climbing again up to 7 seconds.... Anyone has an exlpanation for this behavior. I mean, we are in a local network with pingtime of 1ms...... _______________________________________________ Red5 mailing list [email protected] http://osflash.org/mailman/listinfo/red5_osflash.org
