And if that doesn't help, then you might also try it out at some smaller dimensions to see if you get a better overall framerate. It may be that 720x576 is just too much to handle very quickly. I've not experimented that much with attaching a camera - but I do recall that the bigger the image, the smaller the frame rate was.
-N On Sun, 15 Apr 2007, Thijs Triemstra | Collab wrote: > You're missing a parameter for setMode. From the docs: > > public function setMode(width:int, height:int, fps:Number, > favorArea:Boolean = true):void > > so you're using cam.setMode(720,576,false) and that should be > cam.setMode(720,576,15,false) > > hth, > > Thijs > > > On Apr 15, 2007, at 9:50 PM, barnaby menage wrote: > > > Hi > > > > I'm designing a video recording kiosk and am using red5 to record > > video streams on to computer locally (standalone). > > The client recording app is based on message Recorder example. > > Red5 and the client app run on the same machine. > > > > I have 2 usb devices: > > > > - an maudio breakout box with a usb2 connection connected to a > > condenser mic > > - a security camera connected to a usb2 analog video capture device > > (dazzle) > > > > the pc: > > > > core 2 6400 (2.13 Ghz) > > 1 gb of ram > > Windows XP > > > > I'm capturing at: > > > > PAL (720 x 576) > > 15 fps > > audio rate 22 Khz > > camera quality 75 > > > > code below: > > > > var client_cam = Camera.get(); > > client_cam.setMode(720,576, false); > > client_cam.setQuality(0, 75); > > var client_mic = Microphone.get(); > > client_mic.setRate(22); > > > > I only getting about 2 fps on average. > > > > Any suggestions on improving this? hardware, pc or red5 tweaks etc.. > > > > Be very grateful as have very tight deadline. > > > > > > > > > > > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > > Behalf Of Mondain > > Sent: 15 April 2007 17:38 > > To: [email protected] > > Subject: Re: [Red5] Just installed 0.6 RC2 but ... (Mondain) ... > > > > If the problems continue, I suggest that you uninstall the older > > versions and install RC3. > > > > Paul > > > > On 4/14/07, David Schulberg < [EMAIL PROTECTED]> wrote: > > Hi, > > > > > > Probably was caused by reinstalling Red5 over the top of my > > previous RC1 version. Had done uninstall but that seems to have not > > been enough to clean away RC1. > > > > > > --------------------------------------------------------- > > > > When I start Red5 service it fails as shown below in red5.log. > > > > I have just uninstalled previous version of Red5 and installed v0.6 > > RC2. > > > > > > INFO | jvm 1 | 2007/04/06 20:06:05 | WrapperSimpleApp: > > Encountered an error running main: java.lang.NoSuchMethodError: > > org.apache.mina.common.ByteBuffer.release()V > > > > INFO | jvm 1 | 2007/04/06 20:06:05 | > > java.lang.NoSuchMethodError: > > org.apache.mina.common.ByteBuffer.release()V > > > > . > > > > STATUS | wrapper | 2007/04/06 20:06:07 | <-- Wrapper Stopped > > > > > > Mondain pointed out that It looks as though I am using new Red5 > > code with Mina 2. As far as he could recall .release() is not > > supported in version 2. > > > > What puzzles me is that I have installed Red5 0.6 RC2 on another > > computer and Red5 runs fine there. > > > > > > > > Regards, > > > > > > David Schulberg > > > > > > > > > > _______________________________________________ > > Red5 mailing list > > [email protected] > > http://osflash.org/mailman/listinfo/red5_osflash.org > > > > > > > > > > -- > > The early bird may get the worm, but the second mouse gets the cheese. > > _______________________________________________ > > Red5 mailing list > > [email protected] > > http://osflash.org/mailman/listinfo/red5_osflash.org > > _______________________________________________ Red5 mailing list [email protected] http://osflash.org/mailman/listinfo/red5_osflash.org
