Lista de Discuss�o Rede Wan - http://www.networkdesigners.com.br

Mude o Default Gateway do PR3000 para 10.1.1.53.

[]�s

Daniel

>From: [EMAIL PROTECTED]
>Reply-To: "Lista de Discuss�o Rede Wan" <[EMAIL PROTECTED]>
>To: "Lista de Discuss�o Rede Wan" <[EMAIL PROTECTED]>
>Subject: [redewan] Frame-Relay no PR-3000 Cyclades
>Date: Wed, 18 Apr 2001 18:48:01 -0300
>
>Amigos da Lista,
>      Recorro mais uma vez a todos que puderem ajudar a resolver um 
>problema
>de configura��o Frame-Relay  no router Cyclades, sei que � apenas um
>pequeno detalhe, a� vai:
>                                                              O router da
>ponta "A" � um IBM 2210-24E  e da ponta "B" e o PR-3000 da Cyclades, ambos
>com rotas est�ticas apontando para as interfaces seriais. Consigo dar
>telnet no router da ponta "B" somente a partir do router da ponta "A"
>,coloquei apenas a rota default, mas nao tenho rota de volta, pois n�o
>consigo pingar nenhum site. Segue abaixo a configura��o do router Cyclades.
>Desde j� agrade�o a todos. Obrigado!.
>
>Ethernet
>
>Encapsulation Ethernet
>MAC address 00:60:2E:00:00:01
>IP protocol active
>Interface Numbered
>Primary IP address 200.xx.xx.xxx
>Subnet mask 255.255.255.224
>NAT - Address Scope Global
>ICMP Port  inactive
>Incoming Filter List None
>Detailed Incoming IP Accounting Process ( (A)ctive or (I)nactive ) inactive
>Outgoing Filter List None
>Detailed Outgoing IP Accounting Process ( (A)ctive or (I)nactive ) inactive
>Interface Transparent Bridge Inactive
>Proxy ARP  inactive
>Bandwidth 0
>IP Traffic Control List None
>
>slot 1 (ZBUS)
>ZBUS card not configured
>
>slot 2 (SWAN)
>Channel 1
>Encapsulation Frame Relay
>IP protocol active
>Interface Numbered
>Primary IP address 10.1.1.54
>Subnet mask 255.255.255.252
>NAT - Address Scope Global
>ICMP Port  inactive
>Incoming Filter List None
>Detailed Incoming IP Accounting Process ( (A)ctive or (I)nactive ) inactive
>Outgoing Filter List None
>Detailed Outgoing IP Accounting Process ( (A)ctive or (I)nactive ) inactive
>Interface Transparent Bridge Inactive
>Sync mode
>External Clock Source
>Interface V.35
>Bandwidth 64
>IP Traffic Control List None
>SNAP IP inactive
>LMI type ANSI
>T391 in seconds 10
>N391 6
>N392 3
>N393 4
>CIR 48
>
>Number of DLCI's 1
>       Frame Relay MAP
>-----------------------------------
>Nb  DLCI Remote  IP addr     Predictor
>-----------------------------------
>01           16            10.1.1.53       Disabled
>-----------------------------------
>
>DLCI Traffic Control inactive
>
>
>slot 3 (SWAN)
>slot 3 (SWAN) inactive
>
>Username Table
>Username              Status    Type   Host 01   Host 02   Host 03   Host
>04
>
>super                 Enabled   super
>rede                  Enabled   super
>
>  Rules Lists
>
>Rule List Name          Rule      Default   List      Linked
>                         Status    Scope     Type      Rule List
>
>NAT Global Adresses None
>
>NAT Local Adresses None
>
>NAT Static Translation Table None
>
>UDP Timeout (min) 5
>DNS Timeout (min) 1
>TCP Timeout (min) 1440
>TCP flags Timeout (min) 1
>Port map translation Enabled
>
>Radius  inactive
>
>No Radius Server Configured
>
>Tacacs  inactive
>
>No Tacacs Server Configured
>
>Default Usr Menu Itens
>1. Telnet      2. Ping        3. Traceroute  4. PPP
>
>No LAN IP Backup address configured
>
>VPN is not available.
>
>IP Static Routes
>
>Destination      Subnet Mask      Gateway/Interface  Metric/Backup
>OSPF/ExType
>
>Default Gateway                   10.1.1.54          1/no           no
>
>Multilink Circuit number 1
>Criteria for traffic distribution Optimal
>Bandwith limits (upper / lower) Load Backup disabled
>Number of interfaces configured 0
>
>DNS Client Status inactive
>
>TCP Ports
>X25 Socket port range 32001 to 32064
>Terminal Socket port range 31001 to 31064
>Remote Telnet port range 30001 to 30064
>Printer port range   180 to  9999
>
>Delay Time to Route DHCP Messages 4
>
>No DHCP Servers Configured.
>
>Default Router Ip Address for Applications 0.0.0.0
>
>OSPF Global Parameters
>OSPF protocol inactive
>
>OSPF Area Parameters
>Area created none
>
>OSPF Neighbor's Parameters
>Neighbor enabled none
>
>OSPF Vitual Links
>Virtual interface enabled none
>
>Transparent Bridge  inactive


:-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-:
|                                                 |
: Daniel Andre Fehrmann                           :
| Analista de Suporte de Redes /                  |
: Network Support Analyst                         :
| CELEPAR - Cia. Informatica do Parana            |
: Curitiba - Parana - Brasil                      :
| http://www.celepar.gov.br                       |
: [EMAIL PROTECTED]                      :
|._._._._._._._._._._._._._._._._._._._._._._._._.|

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.


______________________________________________________________________
To unsubscribe, write to [EMAIL PROTECTED]

Responder a